B
C
STEP #3
MATTRESS SUPPORT HEIGHT ADJUSTMENT
NOTE
: If Mattress Supports is not in the lowest
position, loosen the mattress bolt and move to the
lowest position.
STEP #3.1
Loosen and remove all hardware (BB) on both sides of
the frame of mattress support.
STEP #3.2
Re-install the bolt on the third hole of the frame
through the hole on the arm support. Fasten the bolt
with plain washers, lock washers & hexagonal nut.
Repeat procedure on the other arms of the Mattress
Support. Please see DETAIL D & DETAIL E
DETAIL E
ALLEN WRENCH
(BB) 1 -
3
8
IN x
1
4
Ø MATTRESS BOLT = 8 PCS
(BB) MATTRESS NUT
(BB) PLAIN WASHER
(BB) LOCK WASHER
MATTRESS
BOLT
MATTRESS
BOLT
MATTRESS
BOLT
MATTRESS
SUPPORT
STABILIZER RAIL
HARDWARE FOR STEP #3
OPEN WRENCH
LOCK
WASHER
MATTRESS
NUT
PLAIN
WASHER
MATTRESS
BOLT
ALLEN
WRENCH
DETAIL D
Page 6 of 7
