5
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBlY
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
6
ASSEMBlY
5
6
Remove stroller from box. The front wheel
and rear wheels
MuST
be installed prior
to use.
fRONT WhEEl
To attach the front wheel, unfold stroller as
described in the section following:
1)
• Unlock the release lever (Fig. 1a) and
unfold stroller frame by pulling upward
on the stroller handle until the frame
locks (Fig. 1b).
• Lean the stroller backwards so that the
front wheel post is pointing upward.
Push the front wheel assembly onto the
front wheel post until locked into place
(Fig. 1c).
NOTE:
Pull on the wheel assembly to
ensure that it is securely attached to the
stroller.
IMPORTANT!
To ensure safe operation of your
stroller, please follow these instructions carefully. Please
keep these instructions for future reference.
IMPORTANT!
Before assembly and each use,
inspect this product for damaged hardware, loose joints,
missing parts or sharp edges. NEvER use if any parts are
missing or broken.
IMPORTANT!
Adult assembly is required.
Fig. 1a
Fig. 1b
Fig. 1c
REAR WhEElS
2)
• Lean the stroller forward to rest on the
front wheels.
• Press the rear wheel posts into the rear
frame hub until it clicks into place (Fig. 2).
NOTE:
Pull on the rear wheel to ensure
that it is securely attached to the stroller.
NOTE: NEvER
use stroller if wheels do not
lock into place. If you need assistance,
please contact our customer service
department at 1-800-328-7363, Monday-
Friday, between 8:00 am and 4:30pm, PST.
MulTI-POSITION hANdlE
3)
• To adjust the handle, press the release
buttons to move the handle up or down to
a comfortable position for the user (Fig. 3).
NOTE:
Make sure the handle clicks into
place before using.
BuMPER BAR
WARNING:
do not use bumper bar to
carry seat with child inside.
The bumper bar is not a
carrying handle.
4)
• Attach the bumper bar by lining up
anchors with the slots on the seat. Push
until it clicks into place (Fig. 4a).
NOTE:
The bumper bar must be securely
attached before using
this product.
Fig. 2
Fig. 3
Release Button
Fig. 4a