ASSEMBLY
ASSEMBLY
6
5
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TOP FRAME CONNECTION
1
•
Insert each side frame into the central frame (Fig. 1a).
NOTE:
Ensure that they click into position. Slide the lock
outward on both sides to secure the side frames (Fig. 1b).
•
Not - Assembled Toy Bar:
Pressing the pins, insert the
toys into the bar as seen in
(Fig. 2c).
•
Assembled Toy Bars:
Pressing the pins, insert the
toy bar to the first pair of
legs. Repeat for the second
toy bar (Fig. 2d).
•
Pressing the top pins insert
each pair of legs to the side
frames attached to each
side of the central frame
(Fig. 2e).
NOTE:
Face the toys
outward or inward when
completing the frame
assembly. All pins must
click into position.
Fig. 1a
Fig. 1b
Fig. 2a
Fig. 2b
Fig. 2d
Fig. 2c
4 legs connectors in
Small tube
pointed up
• After locking the frames,
check that both side
frames are secure by
gently pulling away from
central frame (Fig. 1b).
NOTE:
These parts do
not separate when lock is
correctly engaged.
BAR AND LEGS
2
•
Position the (T) shape
connectors over the top
leg angled as shown
in (Fig. 2a). Slide a
connector to the second
locking pins and secure
in place. Continue
steps for all other legs
until complete. Ensure
the small tubes on the
connestors point up and
all pins click into position.
•
Complete each (T)
shape connectors
attachment onto each
leg and set them as
shown in (Fig. 2b).
Follow the diagram
on (Fig. 2c - Fig.2d) to
insert each side toy bar.
Pins in
Lock both
latches
Insert toy bar
Assembled Bar
Fig. 2e
Pins in
Side 2
Pins in
Side 1
