![background image](http://html1.mh-extra.com/html/baby-trend/serengetti-1956ct/serengetti-1956ct_instruction-manual_3321313006.webp)
ATTACHMENT OF THE BABY TREND INFANT CAR SEAT
* To attach the Baby Trend Infant Car Seat, recline the seat all the way
back. (Fig. 18)
* Position the Infant Car Seat, facing toward the rear of the stroller,
so that the seat shell goes into the front tray and latches into place.
(Fig. 19)
Check that the Infant Car Seat is firmly locked onto the
front tray before using.
*
Check that the front child tray is firmly attached to the stroller
armrests.
Make sure that the car seat locks into the front child tray. Then
turn tabs on stroller frame to lock the front of the car seat into the stroller.
(Fig. 20)
* To remove the Infant Car Seat, squeeze the release handle located at the
foot-end of the seat and carefully lift upward on the seat. (Fig. 21)
Fig. 21
Locks
into tray
Fig. 19
WARNING:
Failure to follow these car
seat attachment instructions could result in
serious injury or death.
Fig. 18
Copyright © 2006 - 2007, Baby Trend Inc., All Rights Reserved.
Fig. 20
6
SPEAKER IN CANOPY FOR MP3 DEVICE
* Use the input jack inside the pocket to plug in your MP3 device.
(Fig. 22)
Fig. 22