Copyright © 2007 - 2008, Baby Trend Inc., All Rights Reserved.
Copyright © 2007 - 2008, Baby Trend Inc., All Rights Reserved.
7
8
OPEN HIGHCHAIR
Push the legs apart until fully open and locked.
(Fig. 16) Push downward on fold levers (left and
right) to ensure frame is locked open.
WARNING:
Always check
that the high chair is locked in the
open position before using.
WARNING:
The tray is not
designed to hold the child in the
chair. The child must be secured by
the safety harness at all times while
in the high chair.
TO ATTACH AND
OPERATE TRAY
TO ATTACH TRAY
To attach the Tray, line up the grooves on the
bottom of the tray with the armrests of the high
chair. Squeeze the Tray’s release handle and
slide the tray onto the armrests (Fig. 17). The
Tray has a 3-position adjustment. To adjust the
position, squeeze the Tray’s release handle located
underneath the tray and reposition the tray to the
desired position (Fig. 18). Release the Tray’s
handle. Check that the Tray is securely locked in
its new position.
TO ATTACH INSERT TRAY
The dishwasher safe food Tray Insert snaps onto
the High Chair Tray and is held in place by tabs
on the sides of the Tray. When installing the
Tray Insert make sure that its snaps into place to
prevent the child from removing the Tray Insert.
To remove Insert unsnap tabs from the Tray.
OPERATION
OPERATION
Push
Tray Release located
underneath tray
3-position
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Push down to
lock open
RECLINE SEAT
Squeeze recline lever on back of the seat and
adjust to the preferred recline or upright position.
(Fig.19).
When adjusting the seat back position,
be very careful that the child’s arms, hands or
legs do not get caught.
WARNING:
It is
recommended that only children
capable of sitting upright
unassisted use the high chair in the
upright position.
WARNING:
Prevent serious
injury or death from falls or sliding
out. Always secure child in the
restraint system, either in the reclining,
semi-reclining or upright position.
TO USE SAFETY BELT
The Tray is not designed to hold the child in
the chair. Always keep child in view while
in high chair.
NEVER LEAVE CHILD
UNATTENDED
.
1. Place your child’s arms through the loops
formed by the shoulder and waist straps. Place
the crotch strap between your child’s legs.
Insert the Harness Buckles into the Center
Clasp with the Red Button.
2. Adjust shoulder and waist straps for your
child’s comfort and safety by sliding buckles
in either direction. Safety straps are to fit snug
around your child. (Fig. 20)
TO RELEASE SAFETY BELT
Push Red Button on Center Clasp, the two
Harness Buckles will pop free. (Fig. 21)
Adjust for a snug fit
Fig. 20
Fig. 21
Center Clasp
