Baby Trend HC01950 Скачать руководство пользователя страница 4

Страница: 4 / 6

Fig. 9

Fig. 10

Hole

Push

Buttons

Hole

Push

Buttons

8. Insert the Legs into the ends of the front

tube of both the right and left Upper Frame

Assemblies (Fig. 9). Note: Legs are properly

connected when the push buttons are lined up

with the holes on the ends of the Upper Frame

Assemblies. Make sure the push buttons are

engaged before use.

9. Insert another Leg into the ends of the rear

tube of both the right and left Upper Frame

Assemblies (Fig. 10).

10. Attach each of the Casters to the high chair

feet as shown in Figure 11. Snap casters into

Bottom of the foot. Check that all four Casters

are securely fastened to the High Chair.

11. Flip over Tray to attach Crotch Retainer. The

molded plastic housing must be oriented by

facing the slot toward front of the Tray. Insert

the 4 (3.5mm X 10) Screws and tighten.

DO NOT OVER-TIGHTEN

(Fig. 12).

Fig. 11

TO ATTACH SEAT PAD

NOTE: Certain High Chair models are packaged

with the High Chair Seat Pad and Seat Insert

already attached to the Seat Back. If your model

has a Seat Pad and Seat Insert on the Seat Back

please skip ahead to Step 2.

1. Loop the flap on the back of the pad over the

top of the Seat Back. Connect the Seat Pad

to the Seat Back with the two Elastic Loops.

These fit over the Attachment Tabs located near

the top harness slots (Fig. 13).

2. Attach the bottom of Seat Pad to the Seat Base

with the two Elastic loops located at the rear of

the bottom of the Seat Pad. These fit over the

Attachment Tabs located on the Seat Base near

where the Seat Back and Seat Base Join.

(Fig. 14)

3. Set Seat Insert onto Seat Pad.

4. Thread non-buckle end of Harness Straps

called Harness Attachment Tabs through the

provide slots in the Seat Fabric, Seat Insert,

Seat Back, and Seat Base (Fig. 15). When

Harness Attachment Tabs are through the

provided slots, rotate the Harness Attachment

Tabs 90 degrees. Make sure that the straps are

firmly in place.

TO REMOVE SEAT PAD

Reverse steps above.

ASSEMBLY

Fig. 12

Fig. 13

Fig. 15

Fig. 14

Содержание HC01950







Результаты поиска

Содержание HC01950

Отзывы:

Похожие инструкции для HC01950

Бренды по названию

Популярные бренды

Baby Trend HC01950, Инструкция по эксплуатации

Результаты поиска

Содержание HC01950

Отзывы:

Похожие инструкции для HC01950

Бренды по названию

Популярные бренды