![background image](http://html1.mh-extra.com/html/baby-trend/fb58944/fb58944_owners-manual_3243197019.webp)
35
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
7.5
Installation
WITH
Lap/Shoulder Belt
7.5.1
Installation - Lap/Shoulder Belt
FRONT ENTRY
Belt Routing
• Use this installation method when installing WITH
a Top Tether and use with children 22 to 50 lbs.
(18 to 23 kg).”
• Use this installation method when installing
WITHOUT the Top Tether for use with children
22 to 40 lbs (10 to 18 kg)”
36
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
• If the car seat moves less than 1 inch, installation is
complete. However if the car seat still moves more
than 1 inch, try another seating position or see the
“Vehicle Seat Belts” section and check your vehicle
owner’s manual for information on securing car seats.
To remove car seat:
1. Loosen Top Tether by pressing the button
on Tether Adjuster and sliding belt through
adjuster .
2. Unhook Top Tether Hook from vehicle tether
anchor. Press up on retainer , unhook
Tether Hook , and remove .
3. Loosen LATCH lower anchor belt by
putting knee in seat and while pressing
down , press the button on LATCH
Adjuster and slide belt through
adjuster .
4. Unhook LATCH lower anchor belt connectors
from vehicle anchors. Press up on retainer ,
unhook Tether Hook , and remove .
NOTE: When removing the LATCH
connector, rotating the connector
90º can asist in removal from
vehicle anchor.
1
2
2
3
4
3
4
1
2
1
2
2
3
1
2
3
1
To secure car seat in vehicle:
1. Assemble the Back Support (see “Assembly
and Removal of Back Support” section).
2. Store LATCH Connectors on back
of seat.
WARNING!
• Vehicle seat belt system MUST stay tightly adjusted to car
seat at all times. If vehicle seat belt does not stay tight, read
vehicle owner’s manual and “Vehicle Seat Belts” section in
this manual.
• Harness straps MUST be routed between back of the Back
Support and the vehicle lap/shoulder belt when installed us-
ing “FRONT ENTRY” belt routing.
• When using Lap/Shoulder belt WITHOUT a tether belt routing
MUST be changed to Rear Entry WITHOUT a tether when
child’s WEIGHT is 40 lbs. (18 kg) or more.
LATCH Connectors
1
Tether
Adjuster