WARNING
1. Place child in the infant car seat and
confirm if the lowest belt slot is even
or below the child's shoulder.
- If the lowest belt slot is even or below
the child's shoulder the small infant
insert is NOT needed.
Store small infant insert in a
secure place when not in use.
- If the lowest belt slot is above the
child's shoulder proceed to step 2.
Proper height is even or just
below the shoulder.
DEATH OR SERIOUS INJURY CAN OCCUR
• Only to be used if child’s shoulders are below the lowest
harness slot.
• Do Not use if child’s shoulders are even or above lowest
harness slot.
• Do Not use with a child whose weight is greater than 8 lbs.
• Only for use with approved Baby Trend® Infant Carriers.
Models Flex-Loc, EZ Flex-Loc, EZ Loc, Inertia and Secure.
• DISCONTINUE use when child’s shoulders are even or above
the lowest harness slot or child’s weight is greater than 8 lbs.
• Do Not use without the small infant insert for children
whose weight is less than 5 lbs.
Read the Small Infant Insert Use Instructions Prior To Use
Small Infant Insert Use
2. Install the small infant insert only
when the child is removed from the
infant carrier.
- Pull back lower half of the seat pad
(Fig. 1).
3. Place the small infant insert
between harness straps and crotch
buckle as shown in (Fig. 2).
4. Lower the seat pad and fasten
around infant car seat.
5. Place child in infant car seat and
check if child’s shoulder is even or
above the lowest slot.
SMALL INFANT
INSERT
2
1
Be sure harness straps locate
into notches on sides of insert.
Text imprint on the small infant
insert, always faces up.
Small Infant Insert Use
Copyright © 2017, Baby Trend
®
, Inc.
Copyright © 2017, Baby Trend
®
, Inc.
