5
Copyright © 2015, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2015, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
6
ASSEMBLY
ASSEMBLY
Secure Bottom Seat Cover
4)
• Pull Flap down and snap all the Buttons
to the bottom of the Seat Pad (Fig. 4).
TOY BAR INSTALLATION
5)
•
Position the toy bar above the product
as shown (Fig. 5a). Insert the end Clips
of the toy bar on the frame.
• To adjust the toy bar position, slide the
toy bar up or down (Fig. 5b).
HEADREST
6)
• Unfasten the fabric loop on the back of
the headrest. Insert the loose end of the
loop on the back of the headrest through
the loop on the seat pad. Secure the
headrest to the seat pad by fastening
the fabric loop on the back of the
headrest (Fig. 6).
INSTALLING THE BATTERIES
The music/vibration unit requires three size C batteries (not included). It is
recommended that you use alkaline batteries for longer battery life.
CAUTION:
To prevent possible battery leakage, be
sure to follow the guidelines outlined below.
• Do not mix old and new batteries.
• Do not mix different types (alkaline, standard, or rechargeable).
• Keep batteries out of reach of children.
• Always dispose of batteries properly.
• Remove batteries when the product is not in use for long periods of time.
• Never leave exhausted batteries in the unit.
• Never try to recharge non-rechargeable batteries.
2)
• Remove the battery cover using a Philips
screwdriver (Fig. 2a). Install three size C
batteries as shown (Fig. 2b). Re-install
battery door and secure with screw. Do
not overtighten the screw.
INSTALLING MUSIC/VIBRATION UNIT
3)
•
Align the mounting groove on the unit to
the corresponding slot on footrest. Slide
the unit onto the mounting groove until it
is securely in place (Fig. 3).
Fig. 2a
Fig. 2b
Fig. 3
Fig. 5a
Fig. 4
Fig. 5b
Fig. 6
