6. To attach the front child tray, push the tray onto the front frame tube,
lining up the tray between the protruding rivets. Push backward on the
latch until snapped into place. The protruding rivets on the outside of
the frame tube should be between the tray latch. Check that the tray is
securely latched in place. Please see figure 5 and 6.
7. To remove front child tray, pull outward on the latches and pull outward
on the tray. Please see figure 7. Please note that you may attach or
remove one end at a time.
WARNING:
The childʼs tray is not a
restraint device: always secure your child with
the seat belt. DO NOT lift the stroller by the
childʼs tray. Use care when attaching the childʼs
tray on the stroller with a child in the stroller.
8. To attach the front canopy, line up the male fittings on the canopy with
the female fittings on the armrest and push both fittings downward until
snapped into place. Please see figure 8. Push forward on the front edge
of the canopy to open.
Fig. 5.
Fig. 6.
Fig. 7.
Fig. 8.
Rivet
9. To attach the rear canopy line up the female fittings of the canopy with
the male fittings on the handle frame tube and push downward. Please
see figure 9.
10. To remove rear canopy reverse installation steps and pull up to remove.
Please see figure 9A.
11. To remove front canopy depress the plastic attachment and pull upward
to remove. Please see figure 9B.
Fig. 9.
4
Fig. 9A.
Fig. 9B.
