manualshive.com logo in svg

Baby Love Ezy-combo, Инструкция

Поделиться
Скачать
Baby Love Ezy-combo Скачать руководство пользователя страница 51

51

     The Child Harness shoulder straps must be in the 

slots which are nearest to the child's shoulders, but 
not lower than the child's shoulders. 

     Child Harness straps (shown in orange) through top 

slots. Lap belt though harness strap loops and fitted 
with SecureGuard™ device. 

Hook the Attachment Clip 
onto VERSATETHER™ 
Catch.

Pull left hand harness strap through 
the opposite slot until the straps are of 
equal length.

C.  Pull the left hand Harness Strap & Cross Strap back 

through the opposite shoulder slot. Hook the Child 
Harness Attachment Clip onto the VERSATETHER™ 
Catch and ensure that the straps are equal in length.

        IMPORTANT: 

Always adjust the height of the shoulder straps as the 
child grows.

VERSATETHER™ is only intended for use in attaching a 
child harness.

CHILD HARNESS PREPARATION

BOOSTER MODE WITH CHILD HARNESS

Содержание Ezy-combo













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды