Baby Lock Serenade BLSN Скачать руководство пользователя страница 102 | Manualshive

Страница: 102 / 119

background image

Before calling for service, check the following items.

If the problem still persists, contact the place of purchase or your nearest authorized retailer.

TROUBLE SHOOTING

Problem

Cause

Correction

Reference

101

Upper

thread

breaks

Lower

thread

breaks

Skipped

stitches

Needle

breaks

Loose

stitches

Seams

gather or

pucker

1. The machine is not threaded correctly.
2. The thread tension is too tight.

3. The thread is too thick for the needle.
4. The needle is not inserted correctly.

5. The thread is wound around the spool

holder pin.

6. The needle is damaged.
1. The bobbin case is not inserted

correctly.

2. The bobbin case is threaded wrong.
3. The lower thread tension is too tight.
1. The needle is not inserted correctly.

2. The needle is damaged.
3. The wrong size needle has been used.
4. The foot is not attached correctly.
5. The machine is not threaded correctly.
6. The presser foot pressure is not strong

enough.

1. The needle is damaged.
2. The needle is not correctly inserted.

3. Wrong needle size for the fabric.

4. The wrong foot is attached.
5. The needle clamp screw is loose.

6. The presser foot that is used is not

appro-priate for the type of stitch that

you wish to sew.

7. The upper thread tension is too tight.
1. The machine is not correctly threaded.
2. The bobbin case is not correctly threaded.
3. Needle/fabric/thread combination is

wrong.

4. Thread tension is wrong.
1. The needle is too thick for the fabric.
2. The stitch length is adjusted wrong.
3. The thread tension is too tight.

1. Select a finer needle.
2. Readjust the stitch length.
3. Loosen the thread tension.

1. Rethread the machine.
2. Rethread the bobbin case.
3. The needle size must match the fabric

and thread.

4. Correct the thread tension.

1. Insert a new needle.
2. Insert the needle correctly (flat side

towards the back).

3. Choose a needle to match the thread

and fabric.

4. Select the correct foot.
5. Use the screwdriver to firmly tighten the

screw.

6. Attach the presser foot that is

appropriate for the type of stitch that you

wish to sew.

7. Loosen the upper thread tension.

1. Remove and reinsert needle (flat side

towards the back).

2. Insert a new needle.
3. Choose a needle to match the thread.
4. Check and attach correctly.
5. Rethread the machine.
6. Adjusting the presser foot pressure.

1. Remove and reinsert the bobbin case

and pull on the thread. The thread should

pull easily.

2. Rethread both bobbin and bobbin case.
3. Loosen lower thread tension.

1. Rethread the machine.
2. Reduce the thread tension to a lower

number.

3. Select a larger needle.
4. Remove and reinsert the needle (flat

side towards the back).

5. Remove the spool of thread and

rethread machine.

6. Replace the needle.

page 31
page 46

page 45
page 37

page 31

page 37
page 29

page 29
page 46
page 37

page 37
page 45
page 35
page 31
page 46

page 37
page 37

page 45

page 103

page 37

Page 103

page 46
page 31
page 29
page 45

page 46
page 45
page 48
page 46

«
...
100
101
102
103
104
...
»

Содержание Serenade BLSN
























































































































Отзывы:

Нет отзывов

Похожие инструкции для Serenade BLSN

Бренд: Fellowes Страницы: 4

CHARGER 2022 ABLT

Бренд: NSS Страницы: 16

INSIDE-FOG FLUID

Бренд: Safex Страницы: 8

Бренд: U-Line Страницы: 12

Бренд: Qtx Страницы: 6

Бренд: Consew Страницы: 26

Бренд: DIAKAT Страницы: 11

Бренд: Brother Страницы: 36

Бренд: Brother Страницы: 83

Бренд: Brother Страницы: 40

Бренд: Brother Страницы: 97

Бренд: Brother Страницы: 162

Бренд: Brother Страницы: 2

Бренд: Brother Страницы: 50

Бренд: Brother Страницы: 114

Бренд: Brother Страницы: 15

Бренд: Brother Страницы: 16

Бренд: Brother Страницы: 143

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды