Baby Lock Jane BL500A, Инструкция и справочник

Страница: 16 / 52

10
Threading (2)
Note
Please turn off the power before using needle threader. Accidentally stepping on the foot controller during this operation could cause bodily injury or damage to the machine.
1 Rotate hand wheel towards you until
needle is in the highest position, and
lower presser foot.
2 Take thread in your left hand, and
gently pull it forward.
3 Lower needle threader.
✽
Pull thread along the right side of the pin.
✽
Do not force the needle threader lower
than the eye of the needle. Be sure that
the needle is in the highest position.
4 Turn the needle threader lever all
the way in the direction of
1
and
when the hook extends from the
needle hole, pull the thread in the di-
rection of
2
to catch it on the hook.
5 While holding the thread gently, return
the needle threader lever to the right. As
you do this the hook that has caught the
thread will move as well, pulling a loop
of thread through the eye of the needle.
Using the Needle Threader
1
2
6
7
8
9
0
A
3
4
5
Long
Groove
Depression
Thread
Needle Hole
1
2
3
5
6
4
7
8
9
0
A
●
Make sure thread take-up lever is in
highest position and presser foot is up.
✽
When using polyester thread or thread
that tangles or breaks, run the thread
through all Three Hole of the thread guide.
✽
If the thread is still
tangles or breaks, run
the thread through the
holes backwards as
shown in diagram.
Pin
Thread
1
2
Hook
Automatic
Needle
Threader
✽
Pull the thread to
the left and check
that it is caught on
the hook.
Upper Threading