GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
40
Checking the needle
Sewing with a bent needle is extremely dangerous
since the needle may break while the machine is
being operated.
Before using the needle, place the flat side of the
needle on a flat surface and check that the distance
between the needle and the flat surface is even.
a
Flat side
b
Needle type marking
CAUTION
Replacing the needle
Replace the needle as described below. Use the
screwdriver and a needle that has been determined to
be straight according to the instructions in "Checking
the needle".
a
Press
(Needle position button) once or
twice to raise the needle.
a
Needle position button
b
Turn off the sewing machine.
CAUTION
c
Lower the presser foot lever.
a
Presser foot lever
●
If the distance between the needle and the flat
surface is not even, the needle is bent. Do not
use a bent needle.
a
Flat surface
1
2
1
1
●
Before replacing the needle, be sure to
turn off the sewing machine, otherwise
injuries may occur if
/
(Start/stop
button) is accidentally pressed and the
machine starts sewing.
1
1
Содержание Ellure (BLR)
