Baby Lock Ellisimo Gold 2 BLSOG2 Скачать руководство пользователя страница 191

Страница: 191 / 364

BEFORE EMBROIDERING

Embr
oi

de
ry

189

Turn the main power to ON.

→

The following message will appear.

Press .

→

The carriage will move to the initialization position.

■

Removing the Embroidery Unit

Press either

, then press

→

The carriage will move to the removal position.

Turn the main power to OFF.

Hold down the release button, and pull the
embroidery unit away from the machine.

Release button

CAUTION

• Always remove the embroidery frame before

pressing

. Otherwise, the frame may

strike the embroidery foot, and possibly cause
injury.

• The embroidery unit will not fit in the storage

case if this step is not done.

Note

• Be sure to turn off the machine before

removing the embroidery unit, otherwise
damage to the machine may result.

CAUTION

• Do not carry the embroidery unit by holding

the release button compartment.

Содержание Ellisimo Gold 2 BLSOG2













































































































































































































































































































































































Результаты поиска

Содержание Ellisimo Gold 2 BLSOG2

Отзывы:

Baby Lock Ellisimo Gold 2 BLSOG2, Инструкция и справочник, Страница: 191 / 364

Результаты поиска

Содержание Ellisimo Gold 2 BLSOG2

Отзывы: