66
g
Pass the thread along the slot to pass it through the
thread take-up lever hole from the right side.
1
Thread take-up lever
h
Draw the thread down through the slot, and then
through the hole in lower thread guide.
1
Hole in lower thread guide
i
Use the included needle changing tool (threader)
1
to
pass the thread into the needle bar thread guide
2
.
1
Needle changing tool (Threader)
2
Needle bar thread guide
Memo
• Up to four thread spools can be prepared on a
spool stand for the next color change. By hooking
the thread on the thread cutter/holder, the thread
can be smoothly replaced with that of the next
color.
1
Thread cutter/holders
2
Spool stand
