Baby Lock BNT10 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 312

Baby Lock BNT10 Скачать руководство пользователя страница 7

IMPORTANT SAFETY INSTRUCTIONS

5

—————————————————————————————————————————————————————————————————————————————————————

Federal Communications Commission (FCC) Declaration of

Conformity (For USA Only)

Responsible Party: Tacony Corporation

1760 Gilsinn Lane,
Fenton, Missouri 63026 USA

declares that the product
Product Name:

Baby Lock Embroidery Machine

Model Number:

BNT10L

complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the retailer or an experienced radio/TV technician for help.
• The included interface cable should be used in order to ensure compliance with the limits for

a Class B digital device.

• Changes or modifications not expressly approved by Tacony Corporation could void the

user’s authority to operate the equipment.

«
...
5
6
7
8
9
...
»

Содержание BNT10

























































































































































































































































































































Отзывы:

Нет отзывов