Baby Lock A-LINES Sofia BL137A, Инструкция и справочник

Страница: 128 / 176

126
EMBROIDERY
Preparing the Fabric
After attaching a stabilizer material to the embroidery fabric, it is stretched on an embroidery frame.
Attaching a stabilizer
material to the fabric
For successful design stitching and to prevent fabric
puckering around the design, iron fusible stabilizer to
the fabric or place non-fusible stabilizer in the hoop
below the fabric.
Memo
z
There are many types of backing and
topping stabilizers with various weights for
the various fabrics that you may be sewing.
Visit your local retailer to find the stabilizer
that is right for your project.
CAUTION
a
Prepare stabilizer material that is larger than
the embroidery frame being used.
a Fabric
b Size of embroidery frame
c Stabilizer material
b
If you are using stabilizers with adhesive, place
the adhesive surface of the stabilizer material
against the wrong side of the fabric, and iron it
with a steam iron.
a Stabilizer material
b Fabric (wrong side)
c Attached surface
†
When it cannot be ironed or placed in the
hoop
For fabrics, such as towels, which cannot be
ironed or for embroidering in places where
ironing is difficult, place the stabilizer
material under the fabric, and stretch the
fabric in the embroidery frame without
attaching the stabilizer.
●
Always use stabilizer material when
sewing embroidery projects. The needle
may break or bend if you embroider
without using a stabilizer material for thin
fabrics or stretch fabrics. Furthermore,
the pattern may be sewn incorrectly.
a
b
c
2
3
1
0711-0120-C-combo_E.book Page 126 Tuesday, August 26, 2008 2:43 PM