Stand & Play • 6-12 Months
Sit & Play • Toddler up to 75lbs.
4
Identify where the tray slots are on the arms
of the chair. Insert the small tabs on the tray
into slots C and D.
5
Position largest section of the canopy
over the seat. Plug canopy arms in on
both sides of the seatback.
Rotate the tray down and then flex, with your
fingers, the large tabs into slots A and B. To
remove tray, simply reverse these steps.
To remove, unplug canopy arms. Take hold of each
end, twist canopy in half, and bring ends togther to
3
Open Velcro® from the back of the seat towards
the front and re-Velcro® the front strip to the
middle strip.
Unlatch buckles of the 5-piece harness, lay
harness on the seat, place baby’s legs into
leg holes and buckle the harness up infront of
2
Leg enclosure stores neatly under the seat
when not in use.
Pull leg enclosure netting out from storage
pocket and allow leg enclosure to hang down.
Underneath
Chair
Leg
Enclosure
A
B
C
D
