6
To re-assemble the Cover, secure
Cover with Cleats fed through the two
slots.
Insert large Plastic Support back
into Pocket and thread two Harness
Buckles through slots.
Care & Cleaning
Unzip and remove large Plastic
Support and unthread Harness
Buckles through slots.
Pull Cover off the two Cleats and
remove Cover from Frame.
IMPORTANT:
• Cover:
During regular use, the cover may become damp or soiled. Perodically
remove cover to air out and prevent moisture buildup. It is recommended
to machine wash once a week or as pad becomes soiled. Use non-chlorine
bleach only if needed. Tumble dry, low heat.
• Plastic Insert:
Moisture buildup may lead to mildew. Inspect inside pocket for
signs of mildew. To clean, make sure you are in a well-ventilated room. Mix
1 gallon (~4L) of water with 1.5c (0.35l) of chlorine bleach. Apply mixture to
a sponge and wipe the inside of the pocket clean as needed. After cleaning
with the bleach and water solution, wash again with mixture of mild detergent
and water. Rinse thoroughly with clean water, pat dry with towel.
Repeat on other zipper for small
Plastic Support.
3
1
2
CAUTION:
•
Never use product without pad
insert.
•
Never use product without hard
plastic insert.
•
Always wear gloves and
protective eyewear and clothing
when cleaning with bleach.
•
Never mix bleach with ammonia
or any other household cleaners/
chemicals.
•
Use of bleach solution may result
in some fabric color loss.
