4
Assembly/Operating Instructions
Assembling the bassinet:
1
2
Lay the SLEEPER FRAME face down
on a flat surface.
Holding the CENTRAL SUPPORTING
STRUCTURE, open both of the
LEGS outward.
Plug in FRONT AND BACK FEET (2
sets) into SLEEPER FRAME LEGS by
lining up the buttons and holes on the
inside of the legs until you hear a click.
The FEET should sit flat on the floor
when the BASSINET is upright.
3
Plug in MIDDLE SUPPORT BAR
KNUCKLES to FRAME on each side
matching the engraved “L” and “R” on
the KNUCKLES to the “L” and “R” on
the FRAME.
4
Insert MIDDLE SUPPORT BAR into
FRAME on each side until you hear a
click. NOTE: You may need to spread
the FRAME slightly to insert the
MIDDLE SUPPORT BAR.
