Baby Brezza superfast BRZ0083 Скачать руководство пользователя страница 2

IMPORTANT SAFEGUARDS - READ ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

TECHNICAL DATA

Supply voltage: 120V ~ 60Hz                                        Power: 1500W

Model: BRZ0083

1

When using electrical appliances, basic safety precautions should always be followed, including:

• Always use the steam sterilizer dryer on a flat surface.

• DO NOT expose the sterilizer dryer to a source of heat such as a radiator or sun shining through a window.

• To protect against risk of electrical shock, NEVER put sterilizer power base in water or other liquid.  

• Clean the sterilizer dryer with a dry cloth.

• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children. 

• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience

  and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way

  and understand the hazards involved. 

• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children

   without supervision. 

• If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified

  persons in order to avoid a hazard.

• NEVER use detergent or corrosive substances to clean the steam sterilizer dryer.

• NEVER use the machine without water.

• The sterilizer will stop automatically with a warning signal in case of no water or not enough water and

   the heater plate boils dry. If this happens, please run a complete sterilizing cycle with 120ml (4oz) water to

   ensure proper sterilizing is achieved.

• Please always fill with 120ml (4oz) of water or otherwise it may alter the sterilization quality.

• Unplug the sterilizer dryer from outlet when not in use, before cleaning or changing accessories.  

• DO NOT operate the sterilizer dryer with a damaged cord or plug or after appliance malfunctions, or is

  dropped or damaged in any manner.  Return appliance to the nearest Authorized Service Center for

  examination, repair or electrical or mechanical adjustment.

• Any servicing should be performed by an authorized service representative.

• NEVER unplug the product during the sterilizing cycle or otherwise it will reset the sterilizing cycle. In case

   of mistakenly unplugging of the product during the sterilizing cycle, you need to restart the sterilizing cycle

   completely again to ensure a correct sterilizing quality is achieved. 

• Use of any attachments, not recommended or sold by the manufacturer may cause fire, electric shock or

   injury.

• DO NOT use outdoors.

• Working and storage environment temperature: 50° F ~ 95° F  (10° C ~ 35° C)

• DO NOT let cord hang over edge of table or counter.

• DO NOT let cord contact any hot surface.

• Ensure nothing is rested on the heating element surface (the stainless-steel surface on the base) before starting

  the sterilizing process.

• When in use, the sterilizer dryer  contains boiling water and hot steam will escapes from the vent in the lid.

  NEVER touch the Lid, open the Lid, or stand over the appliance when in use.

• Take care when opening as steam can burn and bottles/contents can be hot after Sterilize & Dry cycle.

• NEVER touch the stainless-steel heating element when appliance is on, during or just after use.

• NEVER place any items on top of the sterilizer dryer.

• If it is necessary to stop the sterilizer during any cycle, press the button then unplug from the power outlet.

• NEVER tilt the appliance backwards.

• NEVER run the appliance without Filter tray.

• Do not spill water when filling, especially near power outlets.

• Misuse or use other than described in these instructions may cause injury. 

• The heating element surface is subject to residual heat after use. Always allow unit to cool before handling.

• Allow appliance to cool between uses and do not use more than 2 times in 1 hour.

• The recommended maximum capacity is 6 bottles and accessories.

• Wash hands before touching sterilized parts.

THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY

Superfast Sterilizer Dryer Parts

2

Lid

Accessory tray

Measuring cup

Bottle Tray

Filter Tray

Button

Base

Power cord (not shown)

a) A short power-supply cord (or short detachable power-supply cord) is provided to reduce the

risks resulting from becoming entangled in or tripping over a longer cord.

b) Extension cords (or longer detachable power-supply cords) are available and may be used if care is

exercised in their use.

c) If an extension cord (or a long detachable power-supply cord) is used:

1) The marked electrical rating of the detachable power-supply cord or extension cord should be at least

as great as the electrical rating of the appliance;

2) If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord; and

3) The longer cord should be arranged so that it will not drape over the countertop or tabletop where it

can be tripped over, snagged, or pulled on unintentionally (especially by children).

Содержание superfast BRZ0083

Страница 1: ...LC Instructions PLEASE NOTE All bottles pump parts accessories must be empty clean and rinsed before use in this sterilizer dryer ACTIVATE YOUR WARRANTY www babybrezza com register Benefits Faster customer support extended customer service hours more Scan here ...

Страница 2: ...o ensure a correct sterilizing quality is achieved Use of any attachments not recommended or sold by the manufacturer may cause fire electric shock or injury DO NOT use outdoors Working and storage environment temperature 50 F 95 F 10 C 35 C DO NOT let cord hang over edge of table or counter DO NOT let cord contact any hot surface Ensure nothing is rested on the heating element surface the stainle...

Страница 3: ...first use wash Lid Bottle Tray Accessory Tray and Measuring Cup Before placing items in the appliance for sterilization it is important that all bottles pump parts and accessories must be EMPTY CLEAN FULLY RINSED BEFORE USE in this sterilizer dryer Standby mode When the appliance is plugged in all LEDs flash for 0 5 seconds then enters standby mode Cleaning Always unplug the sterilizer dryer befor...

Страница 4: ...epresentative Troubleshooting Condition Possible Cause Remedy Appliance will not start Unit is unplugged Insufficient water is in heater plate area Add 120ml 4oz water to heater plate area Let the Sterilizer Dryer cool add 120ml 4oz water to heater plate area and run sterilize dry again Make sure the plug is securely inserted into the power outlet 6 Clean heater plate after each use and use distil...

Отзывы: