IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be followed, including the
following:
1. Read all instructions before using.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electric shock do not immerse cord, plug or appliance in water or other liquid.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory,
or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and
instructed concerning use of the appliance by a person responsible for their safety. Close supervision
is necessary when any appliance is used by or near children. Children should be supervised to ensure
that they do not play with the appliance.
5. Unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions,
or is dropped or damaged in any manner. Contact Baby Brezza Customer Service using the contact
information on the back cover for assistance.
7. The use of accessory attachments not recommended by the appliance manufacturer may cause
fire, electric shock or injury.
8. Use on level surface and be sure there is no debris under the unit and the rubber pads are touching
the surface.
9. Household use only. Do not use outdoors.
10. Do not let cord hang over edge of table or counter, or touch hot surfaces.
11. Do not place on or near hot gas or electric burner, or in a heated oven.
12. Extreme caution must be used when moving an appliance containing hot liquids.
13. Do not use appliance for other than intended use.
14. This appliance has a polarized plug (one blade wider than the other). To reduce risk of electric shock,
this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify
the plug in any way.
15. Except cleaning, any other servicing should be performed by an authorized service representative.
16. Make sure machine is turned off before unplugging.
17. A short power-supply cord is provided to reduce risks of becoming entangled in or tripping over
a longer cord. Extension cords are available and may be used if care is exercised in their use.
18. If using the machine with an extension cord, make sure the cord is the proper electrical rating for the
machine. The marked electrical rating of the cord set or extension cord should be at least as great as
the electrical rating of the appliance. The extension cord should be arranged so that it does not drape
over counter top or tabletop where it can be pulled on by children or tripped over unintentionally.
TECHNICAL DATA
Supply voltage: 120V ~ 60Hz Heater Power: 160W
Model: BRZ0080 Current: 1.4 A
Parts & Controls
Get to know your Baby Brezza
Instant Warmer Advanced
1
2
Plug in power cord to turn on the Instant Warmer Advanced.
When plugged in, the Blue LED will turn on (Heater off - room temperature mode).
Fill Water Container with as much water as you plan to use for the day. We recommend
refreshing the water every 24-48 hours and rinsing the Water Container every time it’s
refilled.
3
Touch the
Water
Container Lid
Dispensing Lever
Dispensing Spout
Water Container
MAX line
MIN line
Base
Power Cord
(not shown)
Blue, Yellow, Red LED light
Temperature Button
Nightlight Button
Control Panel
button to choose your desired temperature.
4
5
6
Place bottle under Dispensing Spout and press Dispensing Lever to dispense water.
Release lever to stop dispensing.
Add formula powder to bottle. Always follow formula manufacturer’s mixing ratio and
preparation instructions.
7
Nightlight can be turned on and off by touching the button.
• Blue LED = heater off, room temperature
• Yellow LED = body temperature*
• Red LED = warmer than body temperature*
How to Use
Hand Wash Water Container & Lid before first use. See cleaning instructions on page 3.
•
Never fill Water Container with formula.
• Always use distilled or boiled water cooled
to room temperature.
• Never pour boiling water into Water Container.
• Always keep water filled above MIN Line.
The LED will flash while water is warming.
The LED will remain solid when water is warmed to selected temperature.
You can leave the Instant Warmer Advanced plugged in and set to your desired temperature
so warm water is always ready.
* Warming time may take 10-20 minutes depending on starting temperature of water
poured into water container.
ALWAYS
use boiled, cooled or distilled water suitable for infant formula preparation.
! WARNING:
1
2
