Baby Brezza BRZ0098 Скачать руководство пользователя страница 3

3

4

Set-up and Use

1.  Place the appliance on a flat surface where it is out of reach of children and 

  it will not be knocked or moved during operation.

2.  Remove the lid and accessory rack from the sterilizer base.

3.  Pour distilled water on the stainless steel heater surface to MAX line (120ml).

  Never fill past MAX line. 

4.  Place the accessory rack on the base. 

5.  Place clean bottles with their opening facing downward on the lower posts

  of the accessory rack. Place the bottle accessories (e.g. nipple, collar, cap, etc)

  on the upper posts of accessory rack.

6.  Place the lid on top of sterilizer base. Please ensure that the lid fits securely

  on the base without any gaps where the lid and base meet.  

7.  Plug the appliance into the power outlet.

8.  Press the        On/Off button once. The LCD will display “00:00” and the

  backlight will turn blue. Choose your desired function following the

  instructions below. If there is no selection of function after pressing on/off

  button, the appliance will automatically switch off.

Sterilize and Auto-Dry Function:

1.  Choose the drying time (after steam sterilization): Press the        Sterilize/Dry

  button one time  for 45 minute dry time, two times for 60 minute dry time,

  three times for 30 minute dry time. The sterilize/dry cycle will start 3 seconds

  after the last button is pressed 

2.  When the sterilization cycle starts, the LCD will count up second-by-second

  for the duration of the sterilization cycle.

3.  When the sterilization cycle is complete, the appliance will beep, pause for

  3 seconds and begin the drying cycle for the amount of time selected in

  step 1.  The timer on the LCD will count down second-by-second until it

  reaches 00:00.

4.  When the drying cycle is completed, the appliance will beep 5 times and

  switch off automatically.

Before placing items in the appliance for sterilization it is important that
all bottles, nipples and accessories are empty and that they are CLEAN 
and FULLY RINSED in fresh water.

Cleaning

- Always unplug your product before cleaning.

- Do not immerse the base, the supply cord or the plug in water or other liquids.

- Do not clean base under water tap.  

- Use a soft damp cloth to clean the base and control console.

- Never use abrasive pads to clean the plastic parts of the machine. 

- The lid, accessory rack can be cleaned in hot soapy water.

- Mineral residue, particularly in hard water areas, may deposit on the stainless

  steel heating plate after a few sterilization cycles. To avoid scale build up, wipe

  the surfaces with a soft moist cloth after each operation. 

- Deposits can be removed with proprietary scale removers or by leaving 30ml

  water and vinegar solution (1 part vinegar to 4 parts water) on the heating

  bowl for approximately 30 minutes.  The bowl should then be wiped clean 

  with a clean, dry cloth.  Some discoloration spots may remain after cleaning 

  with a vinegar solution, but these are harmless.

- Do not use abrasives or solvents for cleaning; they may damage the appliance

  and the surface of the heating bowl.

- Dismantle the filter box and clean the filter once a month. Make sure the filter

  is fully dried before placing back to the filter box.

Sterilization only function:

1.  Press the       Sterilize button one time, the LCD will display “00:00” and 

  the steam icon. The sterilization cycle will start 3 seconds after pressing 

  the sterilize button and the LCD will count up second-by-second for the 

  duration of the sterilization cycle.

2.  When the sterilization cycle is complete, the appliance will beep 5 times

  and switch off automatically.

Dryer only function:

1.  Press the        Dry button one time  for 30 minute dry time, two times for

  45 minute dry time, three times for 60 minute dry time. The drying cycle

  will start 3 seconds after the last button is pressed and the timer on the

  LCD will count down second-by second until it reaches 00:00.

2.  When the drying cycle is completed, the appliance will beep 5 times and

  switch off automatically. 

Caution: If it is necessary to remove water from the 

base, always POUR AWAY FROM FAN OPENING. 

Note water pour direction icon on base,

and pour in direction of arrow. 

Отзывы: