background image

 

 

4.10 Call volume adjustment 
Press button 1 once to increase one level during conversation. Press button 3 
to decrease  one  level. When all  LEDs  are  light,  it  mean  the volume  reaches 
the limitation. 
 
4.11 Restore factory setting 

Send  SMS  via  any  cellphone: 

FACTORY# 

to  set  all  parameter  to  factory  value.  Once 

received 

OK

, it succeeds. 

e.g.: FACTORY#     

 

5 SOS emergency call 

Press SOS button for more than 3s to activate GPS automatically. Twice vibration will be 

happened, then the device will send a LBS locating sms to the specific number, 

e.g.:

Emergency call(LBS): nearby Bao

an Road Bao

an District, Shenzhen, Guangdong 

(22.571,113.876)

. Then it will dial the specific numbers by cycle, if there

s no response 

after all the number been dialed for three cycles, it will stop. After dialing the specific 

numbers, if GPS is located, the device will send an accurate address information, e.g.: 

Emergency call(LBS): Bao

an Road, Bao

an District, Shenzhen, Guangdong 

(N22.57139,E113.87710)

. If GPS is not located in 5 minutes, the device will not send the 

accurate address information.   

Notice: To realize this function, please set special numbers first. 

 

6 GPS locating function 

GPS will be activated automatically with flashing Blue LED after power on  the device, If 

GPS is located within 5 minutes, GPS LED keeps in solid bright and the device will send 

accurate address information to the server, then the GPS will be off automatically. If GPS 

is not located after 5 minutes, GPS will be off and the blue LED will in dark state.     

GPS will turn off after 5 minutes if the device stays in the area without GPS signal cover. 

At this time, GPS timing locating function will be activated. The default time interval is 30 

minutes. The GPS will start updating data every 30 minutes. 

 

7. Check location 

7.1 Checking via call 

When one of the 4 specific numbers call the device, hanging off the call when it rings 1-3 

times (Ringing for 1-3 times then hang off, the corresponding specific number LED will not 

light and not ring), device will automatically activate GPS, If rings more than 3 times, it will 

not  activate  GPS,  which  will  enter  dialing  proceed  directly,  indicate  guardian  want  to 

normally talk to their wards. 

GPS searching time can be last for 5 min in maximum after booting device. If succeed to 

activate GPS, device will send accurate location SMS to specific number, which just called, 

PDF created with pdfFactory trial version 

www.pdffactory.com

Содержание GK301












Отзывы: