US-02
Fast Defrosting Breast Milk/ Fast Warming Milk
Use Directions
For 160ml frozen breast milk in the breast milk bag (Or 200ml cold milk
in glass or PP milk bottle from refrigerator)
1. Pour about 25ml purified water into the groove at the bottom of
bottle warmer. (Regulate water volume according to bottle material,
milk volume and initial temperature of milk; it is recommended to use
purified water to prevent scale.)
2. Put milk bottle or milk bag into the warmer and cover the lid part;
then slightly touch the “ON/OFF” switch and turn the knob to the
highest temp “99
℃
”. (If your bottles are too high or too wide, it may
cause that the lid of the bottle warmer can not be tightly covered and
leaks water.)
3. The bottle warmer will start working in 3 seconds after “beeping”
once. (Because the location of the temperature probe, the temp on
the LCD display is not the real-time inside temperature.)
4. It takes about 7 minutes to get a milk that is warmed up. Generally
when the defrosting or heating completes, it will automatically shut
off. (If the temperature of milk is fit but the machine still does not stop,
please you stop manually it and reduce properly the water volume.)
1. If the milk’s temperature is not suitable, you can regulate water
volume to extend or shorten heating time.
2. Since the silica gel bottle has the slowest thermal conductivity,
so you may need to increase the water volume according to the
actual situation.
3. Please be careful not to get scalded when taking off the lid from
the warmer and taking out the milk.
4. This function can not keep milk warm, so please feed your baby
in time after the milk is ready.
5. During warming or before feeding, check the temperature of the
milk in time to avoid scalding baby.
US-03
Note:
