BABI Alert S, Инструкция по эксплуатации

Страница: 9 / 14

Additional Notes for the BABI Alert S Device:
- In normal function the led light will flash every 8 to 10
seconds this indicates that the battery is full. If the led
light flashes very fast continuously the battery needs to
be replaced.
- To cancel an Alarm press the button on the device for 1
Second.
‐ If the pairing communication connection is lost for any
reason the device will go into alarm mode.
‐ To cancel this paired connection the button must be
held down for 6 seconds at power on.
‐ To erase the paired connections to the BABI smart
cushion press the device’s button for 15 seconds. A
tone will sound when the pairing has been erased.
Warranty
The product is guaranteed against any non-conformity defect
within normal operational conditions of use. The warranty
shall not therefore apply in the case of damages caused by
improper use, wear or accidental damage events. (Note: The
battery is non-included in the warranty as it is a consumable item
to be replaced as required.)
8