BABI Alert Plus, Инструкция по эксплуатации

Страница: 9 / 13

Additional Notes for the BABI Alert Plus Device:
- In normal function the led light will flash every 8 to 10
seconds this indicates that the battery is full. If the
led light flashes very fast continuously the battery
needs to be replaced.
- To cancel an Alarm press the button on the device for
1 Second.
‐ If the pairing communication connection is lost for
any reason the device will go into alarm mode.
‐ To cancel this paired connection the button must be
held down for 6 seconds at power on.
Warranty
The product is guaranteed against any non-conformity
defect within normal operational conditions of use. The
warranty shall not therefore apply in the case of damages
caused by improper use, wear or accidental damage
events.
Note: The battery is not included in the warranty as it is a
consumable item that needs to be replacd when required.
8