BAB TECHNOLOGIE INTERCOMMODULE, Документация, Страница: 11 / 37

Dokumentation
INTERCOM MODULE
Initial operation
INTERCOM MODULE BAB TECHNOLOGIE GmbH 11
ESTABLISHING CONNECTIONS 3.3
In order to configure the INTERCOM MODULE, a current browser and a network connection to the
device are required. If the device is in the condition of delivery, it can be accessed at the above-
mentioned IP address and the network settings must be adjusted to the address range, where necessary.
Please follow the information given in the chapter “ Adjusting the network setting of your computer ” for
this purpose.
3.3.1 ADJUSTING THE NETWORK SETTINGS OF YOUR
COMPUTER
In order to adjust the network settings of your computer and establish a connection to the device,
please proceed as described below:

Open the IP address settings (under Windows 7):

Click "Start Button" --> "Control Panel" --> "Network"

Select "Network Connection", then "LAN Connection" ("Intel PRO1000 GT" in the figure
below).
Figure 3: Windows - network and sharing centre