BAB TECHNOLOGIE FLATTOUCH 101, Руководство по установке

Страница: 9 / 11

Installation Manual Commissioning
FLAT TOUCH BAB TECHNOLOGIE 9
3 COMMISSIONING
The FLAT TOUCH is delivered fully installed. This means that the operating system is pre-installed including
all necessary drivers and plug-ins and is ready for operation.
Tip:
A (USB) keyboard and a (USB) computer mouse are helpful for commissioning the FLAT TOUCH.
3.1 CONNECT THE FLATTOUCH
The FLAT TOUCH requires the supplied power supply (mains adapter) and network connection for
operation. The network cable is connected directly to a router or switch to which the visualization server
is also connected.
All connections are located under a cover that is secured with two Phillips screws. The screws are on both
sides on the bottom of the FLAT TOUCH.
Note:
On the FLAT TOUCH 10.1", the two Phillips screws are on the back of the FLAT TOUCH and are covered
with rubber covers!
Figure 2 Connections of the FLAT TOUCH (15.6”)
•
Orange arrow: The four-pole connection for the power supply (DC IN).
•
Green arrow: RJ-45 socket (network connection). The network cable is connected here
•
Red arrow: 4* USB ports, e.g. to connect a keyboard and mouse for commissioning
•
Blue arrow: button to switch on the FLAT TOUCH