APP
MODULE Documentation
16 BAB TECHNOLOGIE GmbH
Now note down the current IP address settings or take a screenshot in order to ensure that you
can reset the IP address setting following the configuration of the
APP
MODULE.
Now change the IP address settings (IP address and subnet mask) as required:
Figure 11: TCP/IPv4 properties
Example of a valid configuration for the factory settings of the
APP
MODULE:
Free IP address:
192.168.1.228
Subnet mask:
255.255.255.0
Now confirm your input with "OK".
Close all windows until the "Windows Network and Sharing Center Settings" window is shown.
Thus, you have adjusted the network settings of your PC to those of the
APP
MODULE. You can access
the web interface of the
APP
MODULE by means of the browser. Restore the original network settings of
your PC by following the steps described above as soon as you have configured the
APP
MODULE
correspondingly.
If the IP address of your PC and your
APP
MODULE are in the same network mask, you can continue with
the configuration.