IS-033
___________________________________________________________________________
_______________________________________________________________________________________
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, Iceland Tel: +354 520 6900 Fax: +354 520 6911
[email protected] / www.baader.is
12
Page 12
Power Connection
The machine is supplied with approximately 5m of
Ölflex 191 5 G 2.5 cable terminating in a type 416P6 plug which is
IP44 splash-proof and conforms to IEC 60 309-2.
To comply with the legal safety regulations, the machine has to be connected to the mains
electrical supply in accordance with the circuit diagram taking into account the regulations of
the local electrical authorities and the rules EN 60204 and VDE 0100.
Seal the cable bushes and screw so they are watertight.
An electrician must read and understand the electrical drawings supplied
with the machine before connecting to the electrical supply. After
connecting the machine the electrician should test correct function of the
electrical equipment and ensure the machine is correctly grounded. It is
important to verify the correct rotation of the electrical motors. Ensure
that all exposed electrical equipment is properly covered. Seal the cable
bushes and tighten to make watertight. The doors of the cabinet must be
closed after the completion of the electrical connection.
Always lock the main electrical switch in the OFF position prior to performing any maintenance
or service work.
Do Not bypass or wire around any safety equipment.
Removal of any cover or guard is prohibited.
Improper operation or insufficient maintenance can result in serious personal injury and severe
material damages.
Employees who are responsible for safe working practices have to ensure that :-
- any maintenance or service work is only completed by qualified personnel.
- operating instructions and information required for procedures completed by operators
to be available at all times. Operators must strictly observe the contents of this
information
