B52 Aries Plus 2.0, Инструкция по эксплуатации

Страница: 6 / 14

www.b52audio.com
6
VALET MODE (remote selectable)
CODE LEARNING
1) In disarmed, open the door, turn ACC to ON position, press + for 2 sec,
siren chirps once to indicate to enter valet mode, LED on.
2) When in valet mode, only press or to lock and unlock.
3) If you are going to have your vehicle serviced, turn ignition to ON, pressing +
simultaneously for 2 sec at the same time. Siren chirps once and LED on mean by
enter into this mode.
4) TO EXIT: To repeat step 1, siren chirps twice to exit this mode, LED off.
1) In disarmed, open the doors, turn ACC from OFF to ON., keep pressing the reset switch 3
sec, siren chirps once, and LED keeps lighting to indicate that the system has entered into
the learning code mode.
2) Press any button of remote controller within 10 sec. Siren chirps once to show that the
first remote controller is learned successfully.
3) Repeat step 2 to program the second, third and fourth transmitter code (siren
chirps twice to indicate the second transmitter code was learned, siren chirps 3
times to indicate the third transmitter code was learned, siren chirps 4 times to
indicate the fourth transmitter code was learned). When the fourth one was learned,
siren chirps twice to indicate to exit program.
4) After learning the remote controller you need, turn ACC from ON to OFF or do not
press the remote within 10 sec, the system will exit the learning mode automatically,
meanwhile siren will chirps twice to indicate.
NOTICE: (the system can only learn four remotes), when learn the fifth remote; the first
one will be erased.
Main Unit
Output Current: 10A × 1
Coding: Learning Code
Voltage: 12VDC± 3V
Static Current: <8mA
Indicator Current: 2 mA
Shock Sensor Current: <5mA
Frequency: 315MHz
Remote(Aries Plus / A52):
Voltage: 12 V
Static Current: <7mA±2mA
Battery: 27A
Frequency: 315 MHz