b2audio Mono, Руководство пользователя

Страница: 9 / 11

Mono
8
3.31 Speaker wiring diagram
PROTECT
POWER
REMOTE
BOOST
FREQ.
LPF PHASE SUBSONIC GAIN
BASS
SLAVE
MASTER
OUTPUT
SLAVE
INPUT
INPUT
CH2 CH1
0.2V 6V 10Hz 50Hz 0dB 9dB 30Hz 90Hz 35Hz 250Hz 0 180
MASTER
SPEAKER
PROTECT
POWER
REMOTE
BOOST FREQ. LPF PHASE SUBSONIC GAIN
BASS
SLAVE
MASTER
OUTPUT
SLAVE
INPUT
INPUT
CH2 CH1
0.2V
6V
10Hz 50Hz 0dB 9dB 30Hz 90Hz 35Hz 250Hz 0 180
MASTER
SPEAKER
LINKED AMPLIFIER SPEAKER CONNECTION
Min. 8 AWG
speaker cable
In a linked amplifier configuration, the MASTER amplifier will control the settings of the SLAVE amplifier.
The positive terminal of the subwoofer's voice coil must be connected to the positive terminal of the
MASTER Amplifier and the negative terminal of the subwoofer's voice coil must be connected to
positive terminal of the SLAVE Amplifier. Since the linked amplifier configuration will increase output
levels by 2 at the same impedance as 1 single unit , make sure that your speakers are wired correctly!
MASTER UNIT
SLAVE UNIT
Speaker Impedance 2~8 ohms
CAUTION
The minimum impedance as 1 unit is 1 .
In a linked configuration the minimum
impedance is 2 .