Wireless Manual v.2.3
Mounting Dimensions
XT100T, XT200T, XT300T
There are (4) holes 0.156” diameter with spacing of 4.7” wide x 2.4” tall
A second option is to use (2) mounting holes 4.7” wide with a maximum diameter of
.175”
XT400T
There are (4) holes 0.156” diameter with spacing of 6.75” wide x 2.4” tall
A second option is to use (2) mounting holes 6.75” wide with a maximum diameter of
.175”
Manual Revision
v.2.3
Reworded all configuration procedures. Added wiring diagrams and troubleshooting pages. Added XT400
diagram
Replacement Part Numbers
Part Number
Description
841-500053
2.4 GHz antenna for all XT Series models
Discontinued
XT100 Series receiver mounted internally to an SBL Series Remote Display.
Fixed at 9600 Baud rate and 1 System ID
841-500028
XT200 Series receiver mounted internally to an SBL Series Remote Display.
Selectable Baud Rate and 2 System IDs
Discontinued
XT300 Series receiver mounted internally to an SBL Series Remote Display.
Selectable Baud Rate and 16 System IDs
Discontinued
XT300 Series receiver mounted internally to an SBL Series Remote Display.
Selectable Baud Rate and 16 System IDs. 2 Digital output
841-500024
*
XT100 Series Transmitter/Receiver in a NEMA 4 case.
Fixed at 9600 Baud rate and 1 System ID
841-500027
*
XT200 Series Transmitter/Receiver in a NEMA 4 case.
Selectable Baud Rate and 2 System IDs
Discontinued
*
XT300 Series Transmitter/Receiver in a NEMA 4 case.
Selectable Baud Rate and 16 System IDs
Discontinued
*
XT300 Series Transmitter/Receiver in a NEMA 4 case.
Selectable Baud Rate and 16 System IDs. 4 Digital inputs or 4 digital outputs.
841-500054
9 Volt DC power supply for all XT Series Transceivers
*Any serial devices can be connected using XT Series Wireless transceivers. PCs can be connected to printers
or multiple indicators can be networked together…
B-TEK
remotes are not required for a wireless system.
RF Exposure
WARNING: To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation
distance of 20 cm or more should be maintained between the antenna of this device and persons during device
operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna
used for this transmitter must not be co-located in conjunction with any other antenna or transmitter. The
preceding statement must be included as a CAUTION statement in OEM product manuals in order to alert
users of FCC RF Exposure compliance.
