B-TEK Scales AquaShield Series, Инструкция по эксплуатации

Страница: 7 / 27

BTEK AquaShield Series Bench Scale Instruction Manual
- 7 -
After fastening the column to the base install all the bench scale and column leveling
feet as shown in the image below.
Place the bench scale on a level surface and adjust the feet on the bench base only.
(Do not adjust the column feet at this point) until the bullseye level shows that it is
level as shown in the image below. Once the scale is positioned and level adjust the
column feet until they sit firm to the surface
(It is important to make sure that the
column feet are taking the pressure off the column only). Finally, tighten all lock
nuts.
Leveling Foot
Leveling Foot Lock Nut