7
4
3
14
8
Loosley fit the safety grub screw (part 8) in collar
Attach the mount to the pole
i) Slide Collars onto the pole.
ii) Fit the grub screw (part 8) into the collar and through
the hole in the pole. This will secure the mount in place.
IMPORTANT:
Safety grub screw (part 8)
must be flush with the back
face of the collar as shown.
14
8
6
5
14
Note: There will always be a gap
between collars when fully tightened.
7
iii) Fasten mount to the pole by tightening the pre-fitted screws (part 7) on all collars
ensuring the gap between collar halves on both sides are equal.
8
8
Optional hole
can be drilled
for grub screw
in bottom collar.
If required mount can
be retro fitted as shown
8
7
14
6
5
