15
To balance the screen, use a drill driver at low torque setting and a 10mm socket.
i. Turn the left spring tension point counter-clockwise for 5 seconds.
ii. Turn the right spring tension point counter-clockwise for 5 seconds.
iii. Repeat steps (i) and (ii) until the screen is nearly balanced.
iv. Fine tune the spring tension points until
item 9
can hold the screens
weight at every height (this may take some time).
SPRING TENSION
POINT
SPRING TENSION
POINT
DRILL DRIVER
10mm
SOCKET
17.
BALANCE SCREEN TO ENABLE HEIGHT ADJUSTMENT
Move up and
down with hands
18.
ADJUSTING THE HEIGHT OF THE SCREEN
Now the screen is balanced, use both hands
to gently move the screen up and down.
SCREEN
