8
i. Insert the joining bars (item B7) halfway into
the non-threaded end of the column (item B1).
The two joining bars with grub screws (item B8)
go in the front of the column and the 2 joining
bars with hex bolts (item 9) go in the back.
IMPORTANT:
Joining bars should be
inserted into the non-threaded end of
the 180cm column.
x
THREADS
THREADED
B1
B7
OPTIONAL: EXTENDING THE COLUMNS
ii. The two joining bars with grub
screws in the front of the column.
The two joining bars with hex
bolts in the rear of the column.
B1
B1
B7
Tighten hex bolts by hand.
Finish tightening using a
10mm spanner.
Back of Column
Front of Column
