PAGE 7 / 7
12. Fix the
wall plate to
the rails
Pass the screws,
selected earlier,
through the covers
and rails and turn
gently clockwise until
you pick up the clamp
piece.
Ensure your wall plate
is vertical before firmly
tightening the screws.
14. Assemble your
B-Tech product
and mount your
AV equipment
Consult the individual product
assembly instructions and
safety guidlines that are
supplied with each B-Tech
product before assembling
the rest of the product.
Finally, double check that all
fixings are secure.
v.0408 OR1BX
13. Apply the end covers
One by one peel off the protective backing from the
end covers (Part 4) and stick in place as shown.
10. Insert the clamp pieces
.
Slide the clamp pieces behind the rails and reposition
where marked. You will need a screwdriver or pencil to
poke them along. Ensure they are of the correct orientation
as shown below.
Protective
Backing
4
4
BT7535
Example only
Flat Screen
BT8006
5 / 6 / 7 / 8 / 9
10 / 11
BT8006
INSTALLATION INSTRUCTIONS (3)
11. Fit the covers
.
Press the covers firmly into place so
they are again centalised.
4
