Mixing- and preparation table Painty
Page 1
1.
Important Information
Thank you for the trust you placed in us by purchasing this B-TEC product. B-TEC products have been
designed and manufactured to the highest quality standards for best operational safety.
Read this document carefully before putting the device
into operation and keep it for future reference.
On page 10 of this manual, there is a form for documenting the safety inspections to be carried out at
regular intervals. The form has to be filled in by specialist technicians (persons with sufficient
knowledge and experience or manufacturer's technicians) or experts (e.g. engineers or Technical Con-
trol Board experts).
A safety inspection must be carried out before
commissioning and at least once a year.
B-TEC products are to be used solely in accordance with the intended use. Usage not in accordance
with the intended use as well as unauthorised modifications invalidate the liability of the manufacturer
for any damages resulting from this. Detailed information regarding intended use to as well as liability
and warranty can be read in section 1.3 and 1.4.
The B-TEC products are only to be used according to the intended used. Im-
proper use of the product can endanger the health of the operator.
1.1.
Explanation of the Symbols
To directly draw attention to important information in this operating manual, the symbols "Caution!"
and "Notice!" are used. Please note that paragraphs with these symbols need particular attention.
Caution!
You will see this symbol whenever attention is drawn to situations in which danger to life
can arise due to or during incorrect or improper operation. Pay special attention to these
symbols and act carefully.
Notice!
You will see this symbol in the operating manual whenever your attention is being drawn
to correct work procedures, economic ways of operating or when the device may be
damaged by incorrect operation.
1.2.
Operating Instruction
The responsible person within the company where the device is placed has to create operating instruc-
tions in accordance with the "Occupational Safety and Health Regulations" applicable in the respective
country. The operating instructions must be adapted to the fluids used and country of application.
1.3.
Liability and Warranty
The product is state of the art, tested and operationally safe. Liability for the function of the product
is transferred to the operating company, if the product is improperly maintained or repaired by per-
sons who are not authorised by the manufacturer and / or supplier, or
if it’s used against the intended
use and the instructions of the user manual. The operator is obliged to operate the product only when
in immaculate condition. The manufacturer is liable for errors or omissions - to the exclusion of further
claims - only within the scope of the statutory warranty obligations. We reserve the right to make
