B-Speech®Medo
Manual
Switch ON/OFF
1. Switch ON: in off mode, press and hold the main button for 6 seconds to switch on. The headset
produces 4 beeps, (low to high). The blue LED flashes 5 times.
2. Standby mode: Headset switch to standby mode from link mode automatically, to save the
power. The blue LED flashes once in each 3 seconds.
3. Switch OFF: in standby mode, press and hold the main button about 2~3 seconds until the red
LED flashes 5 times. The blue LED is off and the headset is off, too.
Pairing
You pair the headset with the phone by adding it to the pairing list in the phone. The two devices then
recognize each other when they connect.
1. When the headset is off, press and hold the main button for 6 to 7 seconds until the blue/red
LED fast flashes.
2. Prepare your phone for turning on Bluetooth function, searching new device, according to the
phone user’s guide. Make sure the product is within 5m of the phone.
3. “B-Speech Medo” appears in the pairing list on your phone. Selects it. Key-in the password
“1234”.
4. The headset goes into link mode after pairing. The blue LED flashes 3 times in each second.
When pairing is successful, the red indicator will turn off and the blue indicator will flash.
If no pairing is possible for a period of time (approx. two minutes), the headset will
automatically be changed from pairing mode to standby mode, and so the previous pairing (if
any) is revoked. You may need to repeat steps 1 to 4 until the pairing is successful.
Note: You only pair the headset with your mobile phone at the first time. You don’t have
to redo the pairing process until you want to use it with another mobile phone.
Calls
Answer a coming call
1. When you receive a call, headset rings, and the blue LED fast flashes 3 times in each 3
seconds.
2. Press the main button to answer the call.
3. If you answer the coming call by your phone, the voice remains on the phone. Press the main
button for a short time to get the call in the headset.
2 / 6