The updating process will take about two minutes. Do not shut down your PC, the B-Speech Linga or interrupt the
connection while the upgrade is in progress. This can cause serious damage to the device.
Note: The Update does not work on Computers running Macintosh, Linux and 64-Bit based Operating Systems.
10. Troubleshooting
In this chapter you find informations to solve problems with your car-kit.
18
Problem
Solution
Notice
Bluetooth-connection is lost
Re-/Voicedial does not work
Mediaplayer-control does not respond
Car-kit does not respond to keystrokes.
The battery won´t be charged
Not all contacts will be transferred
Error while upgrading firmware.
Remove any possible source of
interference and mind the operating
distance.
The operating distance for Bluetooth
class 2 devices is 10 meters.
Verify that your cell phone support the
„hands-free“-Bluetooth-profile.
The „hands-free“-profile enables wireless
telephony
Verify that your mobile phone support
the „AVRCP“ and „A2DP“-Bluetooth-
profile.
The „A2DP“-profile enables music-
streaming.
The „AVRCP“-profile enables the
wireless control of the media player
1) Verify that your car kit is powered on.
2) Shortly push the multifunction button
3) or push the reset button on the
bottom side of the car-kit.
The Interruption of a transfer or TTS
announcement caused by the mobile
phone may cause stability problems
Verify the charging cable is connected
properly to the car-kit and that the red
LED is flashing.
Further informations can be read under
chapter 5.2 in this manual.
The car-kit cannot be found by the cell
phone.
Verify that your car-kit is running in
pairing-mode
The complete name of a contact won´t
be announced.
The Name is limited to 24 characters.
Any other character will be ignored.
1) Depending on the model only SIM or
phone book contacts will be transferred
to the car-kit. Further informations can
be found in the manual of your cell
phone.
2) The numbers of each contact is
limited to 4. Any other numbers will be
ignored.
The new firmware cannot be
downloaded.
Verify the internet connection and try
again later.
Verify that the car-kit is properly
connected to the PC by the USB-cable
and that the car-kit is in the update-
mode
