I N S - S G 4 F B 1 - E N I n s t r u c t i o n G u i d e : S G 4 F B 1 - 1 F r o n t B u m p e r
P a g e
4 | 13
4. VEHICLE PREPARATION
Read all the instructions carefully before installing the product.
Make sure you have enough space to work properly.
Make sure to have the required tools.
Note: Unless differences occur between left hand (LH) and right hand (RH) sides, the procedures are shown for only one side of the
vehicle. Repeat for other side. Right and left sides are defined as when sitting on the vehicle.
4.1 Remove side panel with three (3) locking clip.
1- Locking Clip
4.2 Remove two (2) screws securing bin using T27 Torx socket [T6].
1- Bin Screw
