B.Pro B.PROTHERM BPT 1020 EUK, Перевод оригинальной инструкции по эксплуатации, Страница: 30 / 48

B.PROTHERM Stainless-Steel, Cooled
– 26 –
Cleaning and care
Stainless steel Surfaces made of stainless steel must be kept clean, dry and open to the air
at all times. When the unit is not in operation, keep unit door open to allow air
circulation within.
Regularly remove lime, fat, starch and protein coatings by cleaning. Corrosion
due to lack of air contact can occur under these coatings.
Do not allow concentrated acids, spices, salts etc. to come into extended
periods of contact with parts made of stainless steel. Contact with these sub-
stances can cause corrosion. Acid fumes produced during tile cleaning can
also lead to corrosion.
Do not damage the surface of stainless steel, especially with other metals.
Residues of other metals may form chemical compounds which can cause
corrosion.
Avoid contact with iron and steel at all times. Extreme corrosion can result
when stainless steel comes into contact with iron (e.g. steel wool, wire
scraps, iron-fortified water).
Cleaning frequency The unit must be thoroughly cleaned after each use.
Cleaning methods

Do not use a steam jet device or high-pressure cleaner.
The prescribed cleaning method for routine daily cleaning is to wipe the unit
over with a damp cloth.
Stubborn soiling may be removed with a brush (synthetic or natural bristles).
Any other cleaning method must be approved by B.PRO.
Cleaning agents

Do not use scouring agents or aggressive cleaning agents for the syn-
thetic parts (door inner shell, bottom plate) (material damage!).

Subsection "Cleaning agent for synthetic parts" on Page 7.
Cleaning agents for light soiling:

Commercial cleaning agent/water solution

Soft cleaning cloth

B.PRO microfiber cleaning cloth (use with water only)
Cleaning agents for heavy soiling:

Commercially available stainless steel cleaning agent,
e.g. DeepClean Stainless Steel

Synthetic parts (e.g. inner door shell, bottom plate) may not be cleaned
with stainless steel cleaning agents, as the surface could be scratched.