trailer by pulling it out of the trailer mounting bracket by
the lower half. To do this place your foot on the trailer to
weight the trailer and remove the flag by pulling gently
upward.
Front Fork Tightening
COZ -
The front fork of the COZ pivots to the left and right.
The fork pivots around the “boom” tube. The fork is fas-
tened to the “boom” by a 5mm Allen bolt and lock washer,
Fig. 21
. As a final check before attaching your trailer, make
sure the bolt is securely tightened. For reference, torque on
bolts should be: 44 inch pounds
YAK -
The front fork of the YAK pivots to the left and right
between the upper and lower rail plates. The fork pivots
around a pivot rod attached to the pivot plates. The pivot
16
FIG. 20
YAK Safety Flag Pole installed in mounting bracket.
reflector. This reflector configuration will keep the trailer
wheel balanced and vibration free.
Safety Flag -
The trailers come with a two piece safety
flag. The two pieces are attached to one another by means
of a metal ferrule. Press the two metal ends of the flag sec-
tions together making sure they insert into one another
completely. After attaching the two flag sections install into
the flag mounting bracket located on the left wheel stay as
shown in
Fig. 19
(COZ) Install into the flag mounting brack-
et located on the back of the cargo stop as shown in
Fig. 20
(YAK). The flag is extremely important in helping to make
you visible to others. You should always make sure the flag
is correctly installed when using your trailer.
When removing the flag it is best to first remove it from the
FIG. 19
COZ Safety Flag Pole installed in mounting bracket.
Содержание COZ
Страница 1: ...OWNER S MANUAL AK Y AK Y...
