b-mola BM50, Руководство пользователя

Страница: 12 / 16

06 05
Getting Started
Installing the filters
Unplug the appliance, find the two grooves
under the front panel, and remove the front
panel by pulling it outward.
4
Illustration Diagram:
HEPA Filter
NCCO Reactor
Basic Information
Main Parts & Components First Time Use
· Place the NCCO Reactor into the air purifier. · Install HEPA filter and pre-filter in sequence
into HEPA filter frame.
· Place the filtration unit into the device.
·There is a click sound to indicate all the filters
install successfully.
Remove all packaging before use.
Control Panel
I
J
A
B
C
D
E
F
G
H
Front Cover
Pre-filter
HEPA Filter Frame
Back Cover
Air Outlet
Power Cord Inlet
Power Cord
Coupling
Power Cord
K
1. Remove all packaging and clean all removable
parts and the grooves of the product with a
soft, dry cloth.
2. Make sure the power sockets and extension
units meet the requirements of the product.
Make sure the product connects to the
power supply before use.
3. This product is equipped with a sensor to
monitor the position of the filter unit. If the
filter unit is not in the correct position, the
product will not work.
4. It is normal for the product to emit warm air
with a mineral smell from the air outlet when
the product first works. It is because the
catalytic oxidation reaction is going on inside
the NCCO Reactor.