b-mola BM150, Руководство пользователя

Страница: 12 / 16

06 05
1. Remove all packaging and clean all removable
parts and the grooves of the product with a
soft, dry cloth.
2. Make sure the power sockets and extension
units meet the requirements of the product.
Make sure the product connects to the
power supply before use.
3. This product is equipped with a sensor to
monitor the position of the filter unit. If the
filter unit is not in the correct position, the
product will not work.
4. It is normal for the product to emit warm air
with a mineral smell from the air outlet when
the product first works. It is because the
catalytic oxidation reaction is going on inside
the NCCO Reactor.
Installing the filters
1 2
Unplug the appliance, find the two
grooves under the front panel, and
remove the front panel by pulling it
outward.
Illustration Diagram:
Basic Information
Main Parts & Components First Time Use
Remove all packaging before use.
A
B
D
E
F
G
I H
C
J
M
Pre-filter
Power Cord Coupling
Power Cord Inlet Power Cord
Control Panel
Air Inlet / Front Cover
HEPA Filter and Filter Frame
NCCO Reactor
Unit Body
Left Air
Outlet
Static Filter (Optional)
3
Place the NCCO Reactor into the air purifier.
There is a click sound to indicate it install
successfully.
Getting Started