06
05
Control Panel:
Installation Procedures:
Disconnect the power supply, hold the two
buckles at the bottom of the Front Cover, to
take off the Front Cover.
Illustration Diagram:
M
N
A B C
Panel
Air Inlet
Right Air Outlet
HEPA Filter
HEPA Filter Frame
NCCO Reactor
Pre-filter
Power Cord Inlet
Left Air Outlet
Back
Cover
Control Panel
Power Cord
Basic Information
Main Parts & Components
Remove all packaging materials before usage.
*Activated only after the unit has connected with Air Quality Monitor.
*If the connection between unit and external device has been disconnected, the Air Quality Indicator
will be extinguished after 30 seconds.
*Unit supports 802.11 b/g/n 2.4Ghz Wifi. If there is any connection problem, please contact your router
supplier for problem solution.
Display Screen
Air Speed
Reduce Button
Air Speed
Increase Button
Eco Mode
Button
ON / OFF
Button
Air Quality Indicator *
D
E
F
G
H
I
J
Static Filter
(Optional)
Install the upper NCCO Reactor and HEPA
Filter Frame in sequence into unit. A clicking
sound would be heard to indicate a successful
filters installation. The installation steps of the
lower filters are the same as the upper one.
First, put Static Filter on HEPA Filter and then
install Static Filter and HEPA Filter into HEPA
Filter Frame. Then, put Pre-filter on HEPA FIlter
Frame.
Power Cord Coupling
K L
Getting Started
First-time Operation
1. Remove all packaging materials, use a soft dry
cloth to clean all the parts then re-assemble
parts back together.
2. Placing the unit on a dry, solid, level surface,
and ensure the unit is provided with reasonable
space of at least 15 cm from any objects, in
order to operate effectively.
3. Check power sockets and any extension cords
to confirm compliance with unit requirements.
Ensure that the unit is plugged in before usage.
4. The unit is installed a sensor, if filters have not
been properly installed, the unit wouldn't
operate.
5. When the unit is turned on for the first time,
warm air and mineral smell may be released
from the air outlet. This is normal as catalytic
oxidation is taking place inside the NCCO Reactor,
and completely harmless to human body.
