
RFM-RPT-3_868_BATT_QUG_v1.2
RFM-RPT-3
ENG 2
WMBUS 868 MHz repeater for B METERS radio modules
Safety
During the installation process, handle the device with care, don’t crush, don’t bent, don’t exposure to electrostatic
discharges which could damage permanently the device, do not install close to heat sources (radiators, conditioners,
convectors etc..).
The RFM-RPT-3 repeater doesn’t contain hazardous materials in accordance with European directives 91/157/EEC,
93/86/EEC, and 2002/95/EC(RoHS). The device requires specific disposal on the end of its lifetime. Recycling is mandatory
or recommended following the Directive RAEE 2012/19/UE inside European Union region, or anyway dispose in
accordance with local laws and regulations. Do not burn, or undergo to high temperatures.
The RFM-RPT-3 repeater works reliably in the environmental conditions specified in this manual. Any unauthorized
intervention and/or modification may cause malfunctions or total damaging of the product.
Warranty
The warranty period is set at 24 (twenty-four) months from the date of the shipping of the material. Warranty is against defects
in materials or workmanship when the product is properly used and maintained in normal efficiency. This Warranty is valid and
enforceable in the country where the product was purchased. In the event that the product has been purchased in a country of
the European Union, the warranty is still valid in all countries of the Community.
To obtain warranty service, it is requested to comply with the following clauses:
1.
Products must be delivered for repair at the expense of the customer.
2.
The product warranty will be subject to the exhibition of a tax document (receipt, receipt or bill of sale), which
attests to the date of purchase of the product.
3.
The repair will not affect the original date of expiration of the warranty and will not involve the renewal or extension
thereof. .
4.
If at the time of the repair, the product has not any defect, it will be charged the costs of the technical analysis.
5.
The warranty is void if the failure was due to: impacts, falls, misuse or abuse of the product, use of non-original
batteries, accidents, product alteration, replacement/detachment of seals and/or product tampering. The same also
does not cover damage caused during transport if packages used are unsuitable.
6.
The warranty is not covering the battery of the product.
7.
The warranty does not cover the inability to use the product, other costs incidental or consequential damages or
other expenses incurred by the purchaser.
8.
The warranty doesn’t cover damage to the product caused by usage in any other way than described in this manual.
Support on the products
If the product needs to be sent to the technical assistance, contact your dealer or contact the BMETERS After sales service at
[email protected].
Declaration of Conformity
Hereby, B METERS, declares that this RFM-RX2 is in compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU.
The complete declaration can be downloaded from the official website
Contact Info
B METERS Srl
Via Friuli 3
Gonars (UD) – 33050
Italy
Tel: +39 0432931415
Fax: +39 0432992661
E-Mail (sales/informations):
E-mail (technical support):
Web: